Image folder cannot be created, Ricoh Imaging
What it means and what to do: it depends on the model; find yours below.
29Ricoh Imaging manuals we read list this message
In the 29 we read
| Camera | What it means† | What to do† | What its manual also says† |
|---|---|---|---|
| KF | The maximum folder number is used, so no more images can be saved. | Place fresh storage media inside or erase existing data from present device. | Not stated |
| Pentax 645Z | The maximum folder number is reached and no more images can be saved. | Insert a new memory card or format the card. | Not stated |
| Pentax K-01 | Maximum folder and file limits are reached, blocking new saves. | Insert a new card or format the current card. | If static electricity causes issues, remove and reinsert the battery. Check listed items before contacting service. |
| Pentax K-3 Mark III | The camera has reached the limit for image folders, preventing new ones from being made. | Insert a fresh memory card or format the current one to reset the folder count. | Not stated |
| Pentax K-3 Mark III Monochrome | The camera has reached the limit of 999 folders, so no new ones can be made. | Insert a fresh memory card or format the current one to reset the folder count. | If the camera shuts down due to heat, leave it off to cool down before restarting. Turn the lens zoom ring to a position where shooting is possible if a retractable lens is not extended. |
| Pentax K-30 | Maximum folder and file numbers are used, so no more images can be saved. | Insert a new SD card or format the current card. | If static electricity causes issues, remove and reinsert the battery. If the problem persists after this, no repairs are needed. |
| Pentax K-3II | Maximum folder number is used, so no more images can be saved. | Insert a new memory card or format the current card. | Use the optional Image Sensor Cleaning Kit when cleaning the CMOS sensor, as it is a precision part. |
| Pentax K-5 | Maximum folder and file numbers are used, preventing new saves. | Insert a new card or format the current card. | Not stated |
| Pentax K-50 | Maximum folder and file numbers are used, preventing new images from being saved. | Place fresh SD Memory Card inside or reformat existing one. | If static electricity causes issues, take the battery out and put it back in. Check listed items before contacting service. |
| Pentax K-5II | Maximum folder and file numbers are used, blocking new saves. | Insert a new SD card or format the current card. | If static electricity causes issues, remove and reinsert the battery. If the mirror stays up, remove and reinsert the battery, then turn the camera on to retract it. Check these steps before contacting service. |
| Pentax K-7 | Maximum folder and file numbers are reached, blocking new saves. | Insert a new card or format the current card. | If static electricity causes issues, remove and reinsert the battery, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it. Check these steps before contacting service. |
| Pentax K-70 | The maximum folder number is used, so no more images can be saved. | Place fresh storage media inside or erase existing data from present device. | Not stated |
| Pentax K-S1 | The maximum folder number is used, so no more images can be saved. | Insert a new memory card or format the card. | Use the optional kit for cleaning as the sensor is a precision part. |
| Pentax K-S2 | The maximum folder number is reached, so no more images can be saved. | Insert a new memory card or format the card. | Not stated |
| Pentax K-m | Maximum folder and file numbers are used, preventing new saves. | Insert a new card or format the current card. | Same as “What the manuals also say” below |
| Pentax K-r | Maximum folder and file numbers are reached, preventing new image saves. | Place fresh SD Memory Card inside or reformat existing one. | Not stated |
| Pentax K-x | Maximum folder and file numbers are used, preventing new saves. | Insert a new SD card or format the current card. | If static electricity causes issues, remove and reinsert batteries, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it. Check troubleshooting items before contacting service. |
| Pentax K10D | Maximum folder and file numbers are reached, blocking new saves. | Insert a new card or format the current card. | Same as “What the manuals also say” below |
| Pentax K200D | Maximum folder and file numbers are reached, blocking new saves. | Insert a new card or format the current card. | Same as “What the manuals also say” below |
| Pentax K20D | Maximum folder and file numbers are used, preventing new saves. | Insert a new card or format the current card. | Not stated |
| Pentax KP | The camera has reached its limit for folders and cannot save new photos. | Insert a fresh memory card or format the current one to reset the folder count. | Not stated |
| Pentax Q | Maximum folder and file numbers are used, preventing new image saves. | Insert a new SD card or format the current card. | Not stated |
| Pentax Q-S1 | Maximum folder and file numbers are reached, preventing new folders. | Insert a new card or format the current card. | Use a brush-less blower to clean the sensor, avoiding brushes or cloths that may scratch it. Install a fully charged battery before pixel mapping or firmware updates. |
| Pentax Q10 | Maximum folder and file numbers are used, blocking new saves. | Insert a new card or format the current card. | If static electricity causes issues, remove and reinsert the battery. Check troubleshooting items before contacting service. |
| Pentax Q7 | Max folder and file numbers reached, no new images can be saved. | Insert a new card or format the current card. | Use brush-less blower only; never wipe sensor with cloth or use brush. Install fully charged battery for Pixel Mapping or firmware updates. Leave camera off to cool if overheating. |
| Ricoh GR III | The maximum folder number limit has been reached. | Insert a new card or format the existing card or internal memory. | Not stated |
| Ricoh GR IIIx | The maximum folder number limit has been reached. | Insert a new card or format the existing card or internal memory. | Not stated |
| Ricoh GR IV | The maximum folder number is used, blocking new saves. | Insert a new card or format the existing storage. | Not stated |
| Ricoh GR IV Monochrome | Maximum folder number reached, preventing new image saves. | Insert a new card or format the card or internal memory. | Not stated |
What the manuals also say
- If static electricity causes issues, remove and reinsert batteries, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it (Pentax K-m, Pentax K10D and Pentax K200D).
Not carried here
- KF: “What its manual also says” is not carried here: it is too long for us to restate in a few words. Its document, linked in its row, gives it.
- Pentax K-70: “What its manual also says” is not carried here: it is too long for us to restate in a few words. Its document, linked in its row, gives it.
Other Ricoh Imaging messages
Sources
- RICOH IMAGING camera manuals (PENTAX and RICOH), one per model, checked Oct 6, 2026
Each value is checked automatically against the source it links, on the date shown. How we build these pages
† What it means and What to do and What its manual also says: restated in plain words from the sources linked here; each source has the exact wording.