Settings not stored, Ricoh Imaging
What it means and what to do: it depends on the model; find yours below.
17Ricoh Imaging manuals we read list this message
In the 17 we read
| Camera | What it means† | What to do† | What its manual also says† |
|---|---|---|---|
| Pentax K-01 | DPOF settings failed to save because the card is full. | Delete unwanted images and try the DPOF setting again. | If static electricity causes issues, remove and reinsert the battery. Check listed items before contacting service. |
| Pentax K-30 | The SD card's capacity prevented storing DPOF settings. | Delete unwanted images and perform the DPOF setting again. | If static electricity causes issues, remove and reinsert the battery. If the problem persists after this, no repairs are needed. |
| Pentax K-5 | DPOF settings could not be saved because the card is full. | Delete unwanted images and try the DPOF setting again. | Not stated |
| Pentax K-50 | Saving DPOF settings failed since the SD Memory Card has no remaining space. | Delete unwanted images and perform the DPOF setting again. | If static electricity causes issues, take the battery out and put it back in. Check listed items before contacting service. |
| Pentax K-5II | DPOF settings failed to save because the card is full. | Delete unwanted images and try the DPOF setting again. | If static electricity causes issues, remove and reinsert the battery. If the mirror stays up, remove and reinsert the battery, then turn the camera on to retract it. Check these steps before contacting service. |
| Pentax K-7 | DPOF or rotation settings failed to save because the card is full. | Delete unwanted images and retry the settings or rotation. | If static electricity causes issues, remove and reinsert the battery, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it. Check these steps before contacting service. |
| Pentax K-m | DPOF or rotation settings failed to save because the card is full. | Delete unwanted images and retry the settings or rotation. | Same as “What the manuals also say” below |
| Pentax K-r | DPOF settings could not be saved because the SD Memory Card is full. | Delete unwanted images and try the DPOF setting again. | Not stated |
| Pentax K-x | DPOF settings could not be saved because the card is full. | Delete unwanted images and try setting DPOF again. | If static electricity causes issues, remove and reinsert batteries, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it. Check troubleshooting items before contacting service. |
| Pentax K100D | DPOF settings file could not be saved because the card is full. | Delete unwanted images and set DPOF again. | Not stated |
| Pentax K100D Super | DPOF settings file could not be saved because the SD card is full. | Delete unwanted images and set DPOF again. | Not stated |
| Pentax K10D | Card is full, preventing DPOF or rotation settings from saving. | Delete images and perform the settings or rotation again. | Same as “What the manuals also say” below |
| Pentax K200D | DPOF or rotation settings failed to save because the card is full. | Delete unwanted images and retry the settings or rotation. | Same as “What the manuals also say” below |
| Pentax K20D | DPOF or rotation settings failed to save because the card is full. | Delete unwanted images and retry the settings or rotation. | Not stated |
| Pentax Q | DPOF settings could not be saved because the SD card is full. | Delete unwanted images and perform the DPOF setting again. | Not stated |
| Pentax Q10 | DPOF settings failed to save because the card is full. | Delete unwanted images and try the DPOF setting again. | If static electricity causes issues, remove and reinsert the battery. Check troubleshooting items before contacting service. |
| Pentax Q7 | DPOF settings could not be saved because card is full. | Delete unwanted images and perform DPOF setting again. | Use brush-less blower only; never wipe sensor with cloth or use brush. Install fully charged battery for Pixel Mapping or firmware updates. Leave camera off to cool if overheating. |
What the manuals also say
- If static electricity causes issues, remove and reinsert batteries, then turn power on. If the mirror stays up, repeat battery removal and power on to retract it (Pentax K-m, Pentax K10D and Pentax K200D).
Other Ricoh Imaging messages
Sources
- RICOH IMAGING camera manuals (PENTAX and RICOH), one per model, checked Oct 6, 2026
Each value is checked automatically against the source it links, on the date shown. How we build these pages
† What it means and What to do and What its manual also says: restated in plain words from the sources linked here; each source has the exact wording.