There is a problem with the firmware update file, Ricoh Imaging
What it means and what to do: it depends on the model; find yours below.
12Ricoh Imaging manuals we read list this message
In the 12 we read
| Camera | What it means† | What to do† | What its manual also says† |
|---|---|---|---|
| KF | The firmware update file is damaged. | Try downloading the update file again. | Not stated |
| Pentax K-01 | The update file is damaged. | Download the update file again. | Same as “What the manuals also say” below |
| Pentax K-3 Mark III Monochrome | The file used for the update is corrupted. | Download the update file again. | If the camera shuts down due to heat, leave it off to cool down before restarting. Turn the lens zoom ring to a position where shooting is possible if a retractable lens is not extended. |
| Pentax K-30 | The firmware update file is damaged, preventing the update. | Try downloading the update file again. | If static electricity causes issues, remove and reinsert the battery. If the problem persists after this, no repairs are needed. |
| Pentax K-3II | The firmware update file is damaged. | Try downloading the update file again. | Use the optional Image Sensor Cleaning Kit when cleaning the CMOS sensor, as it is a precision part. |
| Pentax K-50 | The update file is damaged. | Try downloading the update file again. | If static electricity causes issues, take the battery out and put it back in. Check listed items before contacting service. |
| Pentax K-70 | The firmware update file is damaged. | Download the update file again. | Not stated |
| Pentax Q | The firmware update failed because the update file is damaged. | Download the update file again. | Not stated |
| Pentax Q10 | The firmware update file is damaged. | Download the update file again. | Same as “What the manuals also say” below |
| Pentax Q7 | The firmware update file is damaged. | Download the update file again. | Use brush-less blower only; never wipe sensor with cloth or use brush. Install fully charged battery for Pixel Mapping or firmware updates. Leave camera off to cool if overheating. |
| Ricoh GR III | The firmware update file is problematic. | Download the update file again and then perform the update. | Not stated |
| Ricoh GR IIIx | The firmware update file is problematic. | Download the update file again and retry the update. | Not stated |
What the manuals also say
- If static electricity causes issues, remove and reinsert the battery. Check listed items before contacting service (Pentax K-01 and Pentax Q10).
Not carried here
- KF: “What its manual also says” is not carried here: it is too long for us to restate in a few words. Its document, linked in its row, gives it.
- Pentax K-70: “What its manual also says” is not carried here: it is too long for us to restate in a few words. Its document, linked in its row, gives it.
Other Ricoh Imaging messages
Sources
- RICOH IMAGING camera manuals (PENTAX and RICOH), one per model, checked Oct 6, 2026
Each value is checked automatically against the source it links, on the date shown. How we build these pages
† What it means and What to do and What its manual also says: restated in plain words from the sources linked here; each source has the exact wording.